After building many custom WiFi HD2 robots, we have combined the most common requests and come up with this standard fully loaded package.
This robot kit comes with everything you need including the charger. All you need is a PC with windows XP or vista that is connected to a wireless network or a PC with a wireless network card and you can set it up peer to peer as an adhoc network. When you receive the robot you will need to configure the wireless bridge, iPocket232, and video server to your network. Instructions for doing this are provided with the robot.
These robots are built to order. Please allow 2-4 weeks for delivery.
The package includes the following:
- An HD robot with all of these features:
- Full Assembly
- 20Ahrs of batteries - (2)
- Motor controller - (1)
- 26" Widened Chassis
- Powerful Gear motors - (4)
- Shipping Crate
- A 360+ degree heavy duty camera pan and -10 to +60 degree heavy duty camera tilt. A 30x Optical zoom very low light Samsung camera mounted to the camera pan and tilt. Entire system mounted under a 10 inch clear plastic UV resistant dome.
- 3 fixed pinhole cameras (typically 2 mounted in the front and one in the rear)
- 4 camera IP video server. All four cameras can be viewed simultaneously via any web browser or each camera can be viewed individually. One audio channel is also provided if you want to attach a microphone to the HD2.
- Two 24V smart charger to charging both batteries at the same time.
- custom control interface WiFi Bridge, iPocket232, Switching Power Supply, Custom Controller Board, USB Gamepad, Custom VB6 PC Program
- Shipping Crate
- Complete assembly and testing
The robot comes completely assembled and ready to go. If you desire some added features you can select any of these options.
Encoder Control Upgrade Package:
With this upgrade will will replace two of the gear motors with encoder gear motors. The encoders will be read by the control board and the distance the robot has traveled will be reported back to the WiFi control program. With the encoders and gear reduction, the resolution is about 100 counts per inch.
ADD $448
Powder Coat the Robot Chassis:
This option is just like it sounds. We will prep the chassis and have it powder coated. We tyially powder coat it flat black, but any color can be specified. Powder coating applies the paint electrostatically and then it's heat cured leaving a very durable uniform finish.
ADD $399
We offer a power distribution board for the 24VDC system. This board allows you to switch between batteries with WiFi Control program and monitors your current use.
ADD $129
